SRM130E5 [TAIYO YUDEN]
Varistor, ROHS COMPLIANT;型号: | SRM130E5 |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | Varistor, ROHS COMPLIANT 电阻器 |
文件: | 总6页 (文件大小:300K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
1
REMINDERS
■Product information in this catalog is as of October 2008. All of the contents specified herein are
subject to change without notice due to technical improvements, etc. Therefore, please check for the
latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment
incorporating such products, which are caused under the conditions other than those specified in this
catalog or individual specification.
■Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual
specification is available.
■Please conduct validation and verification of products in actual condition of mounting and operating
environment before commercial shipment of the equipment.
■All electronic components or functional modules listed in this catalog are developed, designed and
intended for use in general electronics equipment.(for AV, office automation, household, office supply,
information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the
components or devices into any equipment in the field such as transportation,( automotive control, train
control, ship control), transportation signal, disaster prevention, medical, public information network
(telephone exchange, base station) etc. which may have direct influence to harm or injure a human
body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear
control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic
equipment, if the equipment or the electric circuit require high safety or reliability function or
performances, a sufficient reliability evaluation check for safety shall be performed before commercial
shipment and moreover, due consideration to install a protective circuit is strongly recommended at
customer's design stage.
■The contents of this catalog are applicable to the products which are purchased from our sales offices
or distributors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that
may occur in connection with a third party's intellectual property rights and other related rights arising
from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign
Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and
other applicable regulations. Should you have any question or inquiry on this matter, please contact our
sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
3
△
△
リングバリスタ
RING VARISTORS
OPERATING TEMP.
ー25~+120℃
特長ꢀFEATURES
・チタン酸ストロンチウム半導体セラミックを使用しています
・電圧非直線係数(α)が3~7と大きく、さらに静電容量も10~150nFと大きい
波数範囲のノイズが吸収可能です capacitance of 10 to 150 nF. Noise can thus be absorbed over a wide
・Use of strontium titanate semiconductor ceramics.
・Large net voltage non-linear coefficient ( α ) of 3 to 7, and large electrostatic
ため広い周
・平面
電極品
/側面
電極品
range of frequencies.
・Surface electrode type/Side mount electrode type
用途ꢀAPPLICATIONS
・小型モーターのガバナ接点およびコミュテーター、ブラシ間の火花消去、
ノイズ吸収(EMI対策)
・Eliminates sparks between governor contact and commutator and
brushes; absorbs noise in micro motors.
形名表記法ꢀORDERING CODE
1
3
4
6
7
素地種類
外形寸法φD[mm]
個
別仕様
上限電圧[V]
電極数
B△
A△
E△
H△
J△
8.6
S
STR系
△
標準値
1桁目の整数値 表示
3
3極
5極
10.7
5
A
B
C
D
E
F
G
H
I
1
2
3
4
5
6
7
8
9
0
△=スペース
ꢀ9.4※
ꢀ6.0※
ꢀ8.0※
△=スペース
のため別途
お問合せ下さい。
2
8
5
8
※カスタム品
公称下限電圧 E10[V]
電極位置
S
R
当社管理記号
例
記号×0.1
2.0
側面 △△△△
標準品
△=スペース
020
平面
176
17.6
J
S R J
0 4 0 F 3 ○ ○ ○ ○
△ △
1
2
4
5
6
3
7
8
1
3
4
6
7
Material
External DimensionsφD[mm]
Individual Spec
Upper Limit Voltage[V]
Number of Electrode
B△
A△
E△
H△
J△
8.6
10.7
ꢀ9.4※
ꢀ6.0※
ꢀ8.0※
△=Blank Space
S
STR
△
Standard
1
2
3
4
5
6
7
8
9
0
3
5
3Poles
5Poles
A
B
C
D
E
F
G
H
I
△=Blank Space
2
8
5
8
※mark indicates non-standard code
for custom design development.
Nominal Lower Limit Voltage E10[V]
Electrode Position
Internal Code
△△△△
example
020
176
Number×0.1
S
R
Side
Surface
Standard
2.0
17.6
△=Blank Space
J
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
464
△
△
外形寸法ꢀEXTERNAL DIMENSIONS
平
電極 ꢀSurface Electrode Type(SRJC)
側
電極 ꢀSide Electrode Type(SSB)
Fig.
8.50±0.20
(0.335±0.008)
5.00±0.20
8.60±0.20
(0.339±0.008)
5.00±0.20
(0.197±0.008)
0.75max
φD
φd
T
8
(0.197±0.008)
0.65+0.10/ー0.15
(0.026+0.004/ー0.006)
(0.030max)
Unit:mm(inch)
アイテム一覧ꢀPART NUMBERS
EHS
(Environmental
Hazardous
非直
線係数
電極数
測定電流[mA]
Measuring
Current
形状記号
Ordering code
外ꢀ径
φ D
内ꢀ径
φ d
厚
ꢀさ
T
バリスタ電圧[V]
Non-linear
coefficient
Number of
Electrode
3 or 5
E10Voltage
Substances)
SRM
RoHS
16.50±0.50
9.40+0.30
ー0.20
6.95±0.15
6.70+0.30
ー0.10
5.75±0.20
5.00±0.20
1.30+0.40
ー0.20
1.10max
13.0 to 50.0
SRPP
SRA
RoHS
RoHS
12.00±0.30
10.70±0.30
4.0 to 60.0
1.5 to 50.0
3 or 5
0.95±0.15
SRE
RoHS
9.40±0.30
0.95±0.15
0.65+0.10
ー0.15
2.0 to 35.0
平面
電極
SRJC
RoHS
RoHS
RoHS
8.50±0.20
5.85±0.15
4.20±0.15
2.0 to 35.0
3.0 to 9.0
2.0 to 6.5
10
≧2.0
SRG
4.10+0.10
ー0.05
2.80+0.20
ー0.10
2.15±0.10
1.90+0.15
ー0.00
5.00±0.20
5.35+0.20
ー0.10
4.70±0.15
4.70±0.15
0.5±0.1
3
SRHN
0.50+0.10
ー0.20
0.55max
SRHTT
SRHVP
RoHS
RoHS
3.00±0.12
2.80+0.05
ー0.15
8.60±0.20
7.80±0.20
3.0 to 6.5
2.5 to 6.0
0.50max
SSB
電極
RoHS
RoHS
0.75max
2.0 to 14.0
4.0 to 16.0
側面
SSK
0.70+0.05
ー0.15
0.75max
10
≧2.0
3
SSJ
SSD
RoHS
RoHS
6.80±0.15
6.70±0.20
2.0 to 20.0
4.0 to 16.0
0.65±0.10
※上記の寸法以外にも多くの形状を取りそろえております。カスタム形状・特性に関しても、ご相談の上、対応致します。
※We have various shape besides the above. We will cope with the custom about the shape and the character after consultation.
梱包ꢀPACKAGING
最小受注単位数 Minimum Quantity
最小受注単位数 Minimum Quantit[y pcs]
最小受注単位数 Minimum Quantit[y pcs]
Type
Type
ケース詰めꢀCase Package
ケース詰めꢀCase Package
SRM
SRPP
SRA
500
SRHTT
SRHVP
SSB
6000
6000
4000
3000
3000
3000
2000
2000
2000
3000
3000
6000
SRE
SSK
SRJC
SRG
SSJ
SSD
SRHN
セレクションガイド
アイテム一覧
特性図
梱包
Packaging
信
頼性
使用上の注意
Selection Guide
Part Numbers
Electrical characteristics
Reliability Data
Precautions
P.465
̶̶
P.465
P.466
P.470
P.16
etc
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
465
△
△
RELIABILITY DATA
1/2
RING VARISTORS
Item
Specified Value
Test Methods and Remarks
1.Operating Temperature
ー25~+120℃
Range
For the range 50 to 120℃, refer to the derating curve.
ー25~+120℃
2.Storage Temperature Range
3.Rated Power
Refer to individual specification
Refer to individual specification
(at 25±5℃)
E :Constant-current
4.E10 Characteristic
ꢀꢀ source
A
V
:Digital ammeter
:Digital voltmeter
E10:Voltage at
reference current
with application
of 10 mADC
Input waveform is
square wave.
(Width:50m sec,max)
8
5.Non-linear Coefficient
Rated α(at25±5℃)
Refer to individual specification
E
:Constant-current
1
ꢀꢀ source
A
V
Definitionα=
logE10/E1
:Digital ammeter
:Digital voltmeter
E10:Voltage at
E1 :Voltage at reference current with application of 1 mADC
E10:Voltage at reference current with application of 10 mADC
reference current
with application
of 10 mADC
Input waveform is
square wave.
(Width:50m sec,max)
Refer to individual specification
Refer to individual specification
Measuring frequencyꢀꢀ:1kHz±10%
Measuring voltageꢀ ꢀ :1.0±0.5Vrms
Measuring temperatureꢀ:25±5℃
6.Capacitance
7.Tangent of Loss Angle
(tanδ)
Measurement of voltage at reference current at 25℃
and 50℃shall be made for the calculation
by the following equation.
8.Temperature
Refer to individual specification
Characteristic of Capacitance
ꢀE10(50℃)ーE10(25℃)
100
(%/℃)
×
ꢀꢀꢀꢀ E10(25℃)
50℃ー25℃
Change of maximum capacitance deviation in step 1 to 5
Temperature at step 1: 25℃(Reference temperature)
Temperature at step 2: 50℃
Refer to individual specification
9.Pulse
R1:2kΩ
C1:35±5μF
E1:Individual specification
Number of pulse
application:10times
Measuring temperature
ꢀ
:25±5℃
10.Body Strength
Refer to individual specification
Pressing force:Refer to Individual specification
:Depends upon the sample size
L
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
467
△
△
RELIABILITY DATA
2/2
RING VARISTORS
Item
Specified Value
Test Methods and Remarks
11.Adhesion of Electrode
Lead wire shall be soldered perpendicularly onto the
electrode, then pulled out perpendicularly.
Speed to pull out:2.5cm / 2sec
No detachment of electrode or sign of such defects
Solder to be used:Eutectic solder
12. Resistance to
E10:Within ± 20%
Temperature at the tip of soldering iron:280±5℃, 300±5℃
Duration:2sec.
Soldering Heat
α:Refer to individual specification
Preheating temperature:150℃ , 170℃
Recovery:1 hr of recovery under the standard condition after the test.
13.Resistance to Solvent
14.Damp Heat
No significant abnormality in appearance and legible marking.
E10:Within ± 20%
Temperature:60 ± 10℃
Humidity:90 to 95% RH
α:Refer to individual specification
Duration:300 ± 8 hrs
Recovery:1 hr of recovery under the standard condition
after the removal from test chamber.
Measuring conditions:E1 =Current application for 30 sec.
8
E10=Current application for 60 sec.
15.DC Load Resistance
E10:Within ± 20%
E:Constant-current
ꢀꢀ source
α:Refer to individual specification
A:Digital ammeter
V:Digital voltmeter
R:Load adjusting
variable resistor
V
A
P= ○×○
Test environment:standard condition
Current:Refer to individual specification
Duration:300 ± 8 hrs
Recovery:1 hr of recovery under the standard condition
after the removal from test chamber.
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20 ± 2℃
of temperature, 60 to 70% relative humidity and 86 to 106kPa of air pressure.
Unless otherwise specified, all the tests are conducted under the "standard condition."
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
469
△
△
PRECAUTIONS
RING VARISTORS
Stages
Precautions
Technical considerations
◆Verification of operating environment, electrical rating and
performance
1. Circuit Design
1. A malfunction in medical equipment, spacecraft, nuclear
reactors, etc. may cause serious harm to human life or have
severe social ramifications. As such, any Varistors to be
used in such equipment may require higher safety and/or
reliability considerations and should be clearly differentiated
from components used in general purpose applications.
◆Operating Environment precautions
1. Varistors should not be used in the following environments:
(1)Environmental conditions to avoid
a. exposure to water or salt water.
b. exposure to moisture or condensation.
c. exposure to corrosive gases (such as hydrogen sulfide,
sulfurous acid, chlorine, and ammonia)
◆Soldering
2. Soldering
Refer to individual specifications.
8
・Please heat so that the difference of soldering iron tip
temperature and ring varistor temperature becomes
150℃ or less.
・Ring Varistors are susceptible to thermal shock when ex-
posed to rapid or concentrated heating or rapid cooling.
Therefore, the soldering process must be conducted with
a great care so as to prevent malfunction of the compo-
nents due to excessive thermal shock.
・Use a 30W soldering iron with a maximum tip diameter of
3.0mm.
・The soldering iron should not directly touch the products.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
471
△
△
相关型号:
©2020 ICPDF网 联系我们和版权申明